Brand11: 1. Copy folder Brand11 to the root of the USB key formatted as FAT32. *** Your USB key should have less than 40 folders and files in the root. *** 2. Goes to F10 -> System Configuration -> Boot options -> UEFI Boot Mode -> Press "Enter" to enable EFI boot -> Select "Accept" -> Save and exit. 3. Press F9 then "Boot from EFI File", then select your USB key -> Brand11 -> Bootx64.efi -> Press enter to run startup.nsh 4. Follow menu to commit AMT and AT. Chose 1 to commit VPRO with AT, or 3 to commit Non-VPRO with AT 5. Press 9 and then Enter key to lock descriptor and reboot the machine. 6. Press F9 then "Boot from EFI File", then select your USB key -> Brand11 -> Bootx64.efi. You should see the message "Pass!!! This machine is configured" 7. Reboot to F10 and disable EFI boot mode. Done. Brand12: 1. Copy folder Brand12 to the root of the USB key formatted as FAT16/FAT32. *** Your USB key should have less than 40 folders and files in the root. *** 2. Goes to F10 -> System Configuration -> Boot options -> UEFI Boot Mode -> Press "Enter" to enable EFI boot -> Select "Accept" -> Save and exit. 3. Press F9 then ìBoot from EFI Fileî, then select your USB key -> Brand12 -> Bootx64.efi. 4. Follow menu to commit AMT and AT. Brand13: 1. Copy folder Brand13 to the root of the USB key formatted as FAT16/FAT32. *** Your USB key should have less than 40 folders and files in the root. *** 2. Goes to F10 -> System Configuration -> Boot options -> Boot Mode -> Choose "UEFI Hybrid" mode -> Save and exit. 3. Press F9 then ìBoot from EFI Fileî, then select your USB key -> Brand13 -> Bootx64.efi. 4. Follow menu to commit AMT